✨ New Arrivals Just Dropped!Explore
HomeStore

DPA 2006 Twin Diaphragm Omnidirectional Microphone

Product image 1

DPA 2006 Twin Diaphragm Omnidirectional Microphone

DPA 2006 Twin Diaphragm Omnidirectional Microphone

The DPA 2006 features our signature Twin Diaphragm Omni Mic Capsule, engineered to deliver a distinctive, well-balanced sound that bridges the gap between the extreme sound quality of our pencil microphones and the proven reliability of our lavalier microphones.

This omnidirectional design captures audio from all directions with clarity and precision, making it ideal for applications requiring consistent pickup across multiple sound sources.

The dual-diaphragm technology ensures superior acoustic performance while maintaining the compact form factor professionals demand.

The DPA 2006 Twin-Diaphragm Omnidirectional Microphone is also available in a compact version.

Features:

  • Acoustic authenticity
  • Linear throughout a large frequency bandwidth
  • Twin-Diaphragm Capsule Technology
  • Modular flexibility

Specifications:

  • Directional pattern: Omnidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser, Twin Diaphragm Capsule
  • Frequency response: 20 Hz - 20 kHz
  • Effective frequency range ±2 dB: 50 Hz - 20 kHz with typ. 3 dB soft boost at 14 kHz
  • Sensitivity, nominal, ±2 dB at 1 kHz: 40 mV/Pa; -28 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 16 dB(A) re. 20 µPa (max. 18 dB(A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 28 dB (max. 30 dB)
  • Distortion, THD < 1%: 127 dB SPL RMS, 130 dB SPL peak
  • Dynamic range: Typ. 114 dB
  • Max. SPL, THD 10%: 146 dB SPL peak
  • Switchable attenuator, filters etc.: 0 dB / -20 dB
  • Rated output impedance: 200 Ω
  • Minimum load impedance: 2
  • Cable drive capability: 100 m (328 ft)
  • Output balance principle: Impedance balancing with Active Drive
  • Common mode rejection ratio (CMRR): > 60 dB
  • Power supply (for full performance): P48 (Phantom Power)
  • Current consumption: 2.8 mA
  • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Weight: 160 g (5.6 oz)
  • Microphone diameter: 19 mm (0.75 in)
  • Microphone length: 164 mm (6.5 in)
  • Maximum output voltage, RMS: 8 V
  • Polarity: +V at pin 2 for positive sound pressure
  • Temperature range: -40°C to 45°C (-40°F to 113°F)
  • Relative humidity (RH): Up to 90%
  • Sensitivity selection tolerance (at 1 kHz): ±1.5 dB
  • Colours: Matte black

DPA 2006 Twin Diaphragm Omnidirectional Microphone

The DPA 2006 features our signature Twin Diaphragm Omni Mic Capsule, engineered to deliver a distinctive, well-balanced sound that bridges the gap between the extreme sound quality of our pencil microphones and the proven reliability of our lavalier microphones.

This omnidirectional design captures audio from all directions with clarity and precision, making it ideal for applications requiring consistent pickup across multiple sound sources.

The dual-diaphragm technology ensures superior acoustic performance while maintaining the compact form factor professionals demand.

The DPA 2006 Twin-Diaphragm Omnidirectional Microphone is also available in a compact version.

Features:

  • Acoustic authenticity
  • Linear throughout a large frequency bandwidth
  • Twin-Diaphragm Capsule Technology
  • Modular flexibility

Specifications:

  • Directional pattern: Omnidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser, Twin Diaphragm Capsule
  • Frequency response: 20 Hz - 20 kHz
  • Effective frequency range ±2 dB: 50 Hz - 20 kHz with typ. 3 dB soft boost at 14 kHz
  • Sensitivity, nominal, ±2 dB at 1 kHz: 40 mV/Pa; -28 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 16 dB(A) re. 20 µPa (max. 18 dB(A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 28 dB (max. 30 dB)
  • Distortion, THD < 1%: 127 dB SPL RMS, 130 dB SPL peak
  • Dynamic range: Typ. 114 dB
  • Max. SPL, THD 10%: 146 dB SPL peak
  • Switchable attenuator, filters etc.: 0 dB / -20 dB
  • Rated output impedance: 200 Ω
  • Minimum load impedance: 2
  • Cable drive capability: 100 m (328 ft)
  • Output balance principle: Impedance balancing with Active Drive
  • Common mode rejection ratio (CMRR): > 60 dB
  • Power supply (for full performance): P48 (Phantom Power)
  • Current consumption: 2.8 mA
  • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Weight: 160 g (5.6 oz)
  • Microphone diameter: 19 mm (0.75 in)
  • Microphone length: 164 mm (6.5 in)
  • Maximum output voltage, RMS: 8 V
  • Polarity: +V at pin 2 for positive sound pressure
  • Temperature range: -40°C to 45°C (-40°F to 113°F)
  • Relative humidity (RH): Up to 90%
  • Sensitivity selection tolerance (at 1 kHz): ±1.5 dB
  • Colours: Matte black
$377.66

Original: $1,079.02

-65%
DPA 2006 Twin Diaphragm Omnidirectional Microphone—

$1,079.02

$377.66

Description

DPA 2006 Twin Diaphragm Omnidirectional Microphone

The DPA 2006 features our signature Twin Diaphragm Omni Mic Capsule, engineered to deliver a distinctive, well-balanced sound that bridges the gap between the extreme sound quality of our pencil microphones and the proven reliability of our lavalier microphones.

This omnidirectional design captures audio from all directions with clarity and precision, making it ideal for applications requiring consistent pickup across multiple sound sources.

The dual-diaphragm technology ensures superior acoustic performance while maintaining the compact form factor professionals demand.

The DPA 2006 Twin-Diaphragm Omnidirectional Microphone is also available in a compact version.

Features:

  • Acoustic authenticity
  • Linear throughout a large frequency bandwidth
  • Twin-Diaphragm Capsule Technology
  • Modular flexibility

Specifications:

  • Directional pattern: Omnidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser, Twin Diaphragm Capsule
  • Frequency response: 20 Hz - 20 kHz
  • Effective frequency range ±2 dB: 50 Hz - 20 kHz with typ. 3 dB soft boost at 14 kHz
  • Sensitivity, nominal, ±2 dB at 1 kHz: 40 mV/Pa; -28 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 16 dB(A) re. 20 µPa (max. 18 dB(A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 28 dB (max. 30 dB)
  • Distortion, THD < 1%: 127 dB SPL RMS, 130 dB SPL peak
  • Dynamic range: Typ. 114 dB
  • Max. SPL, THD 10%: 146 dB SPL peak
  • Switchable attenuator, filters etc.: 0 dB / -20 dB
  • Rated output impedance: 200 Ω
  • Minimum load impedance: 2
  • Cable drive capability: 100 m (328 ft)
  • Output balance principle: Impedance balancing with Active Drive
  • Common mode rejection ratio (CMRR): > 60 dB
  • Power supply (for full performance): P48 (Phantom Power)
  • Current consumption: 2.8 mA
  • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Weight: 160 g (5.6 oz)
  • Microphone diameter: 19 mm (0.75 in)
  • Microphone length: 164 mm (6.5 in)
  • Maximum output voltage, RMS: 8 V
  • Polarity: +V at pin 2 for positive sound pressure
  • Temperature range: -40°C to 45°C (-40°F to 113°F)
  • Relative humidity (RH): Up to 90%
  • Sensitivity selection tolerance (at 1 kHz): ±1.5 dB
  • Colours: Matte black